Silvercrest SPMR 8000 A1 User Manual download pdf (Page 26)

SilverCrest SPMR 8000 A1

24 - English

Dual scan

Your PMR will normally receive one channel only (with or without CTCSS or DCS code). The dual scan

function allows the monitoring of a second channel with CTCSS or DCS code.

While dual scan is enabled, your PMR will toggle between the two channels.

 Press the Menu

button [5] eleven times. The indication “DCM OF” will

flash on the display.

 Press the Up  [9] or Down  [6] button to switch to a different channel.

 Press the Menu

button [5] to confirm the selected channel and continue to

CTCSS selection. Press the Menu

button [5] again to go to DCS selection.

 Press the Up  [9] or Down  [6] button to set a different CTCSS or DCS

code.

 Press the PTT button [11] to confirm the setting and return to idle mode.

To disable this function, select ”OF” when choosing the DCM channel.

Call tones

The call tone is an audible signal that alerts other stations that you want to transmit a message. The

SilverCrest SPMR 8000 A1 supports 15 call tones.

Selecting the call tone

 Press the Menu

button [5] eight times. The indication “CA” will appear on

the display, the number of the current call tone will flash and the call tone can

be heard.

 Press the Up  [9] or Down  [6] button to set a different call tone.

Sending the call tone

Briefly press the Call button [4] to send the call tone over the current channel.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 183 184

No comments

Silvercrest SPMR 8000 A1 User Manual Page 26