Silvercrest KH 2131 User Manual download pdf (Page 12)

Handling and operation

KH 2131

NOTICE

Two signal sources can be connected to the radio transmission set. The ►

signal to be transmitted can be selected with the switch ROOM 1

resp.

ROOM 2

on the back of the transmitter.

To switch over, for example, the signal source AV1 for a TV connected to ►

the transmitter, place the switch ROOM 1

at the position 1 (see Fig.

Connection example Transmitter).

To switch over, for example, the signal source AV2 for a TV connected to ►

the receiver, place the switch ROOM 2

at the position 2 (see Fig.

Connection example Transmitter and Connection example Receiver).

Channel setting

You can operate up to four radio transmission sets at one location.

When using multiple radio transmission sets, they must be set to diﬀ erent channels.

The transmitter and receiver of each radio transmission set must be set to the

same channel for a successful transfer.

Select a channel (A/B/C/D) with the channel selector switch 

on the

transmitter.

Select the same channel with the channel selector switch 

on the receiver.

Operating the Radio Set

Switch the transmitter on by pressing the On/Oﬀ switch 

Switch the signal source on, for example, a DVD player, and, if necessary, 

start playback.

Switch the r

eceiver on by pressing the On/Oﬀ switch 

Switch the target device on, for example, a TV, and activate the A/V input 

to which you have connected the receiver.

The r

adio transmission should now function.

NOTICE

The device transmits the audio/video signals in the 2.4 GHz frequency ►

range. Take note that, in the 2.4 GHz frequency range, there is no general

otection against listening in or viewing.

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Silvercrest KH 2131 User Manual Page 12