Silvercrest SIKP 2000 B2 Operations Instructions download pdf (Page 11)

SIKP 2000 B2

Switching oﬀ

The appliance switches oﬀ , ... ■

if, within 30 seconds of switching on, you do not select any further function, –

if you activate the button On/Oﬀ – 5 once again, also when it is in

actual use.

NOTICE

In standby mode, that is, after switching oﬀ or before switching on, an "- L-" ►

or an "- H -" appears in the display 8. This heat indicator means:

"- L -" = "Low" - Temperature the cooking area

– 1 <60°C

"- H -" = "High" - Temperature the cooking area

– 1 >60°C

For safety reasons, the cookware recognition feature switches the appliance ■

oﬀ automatically when you ...

remove the cookware from the cooking area

– 1 for longer than 15

seconds, or do not place one there..

Although the energy ﬁ eld is immediately switched oﬀ with short-term

–

cookware removals - the selected function remains, however, active.

Around every 3 seconds a signal tone issues a reminder that, in roughly

15 seconds, the appliance will switch itself oﬀ automatically. If you replace

the cookware back onto the cooking area 1 within 15 seconds, the

selected function will continue on the same settings.

NOTICE

As soon as you take the cookware from the cooking area, "Err" ﬂ ashes in ►

the display.

The cooking area

■ 1 also switches itself oﬀ after 120 minutes of continuous

use, should you not have entered in any new settings in the meantime.

IB_66570_SIKP2000B2_GB_6.indd Abs3:9IB_66570_SIKP2000B2_GB_6.indd Abs3:9 04.07.2011 12:30:54 Uhr04.07.2011 12:30:54 Uhr

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Silvercrest SIKP 2000 B2 Operations Instructions Page 11