Silvercrest KH 997 User Manual download pdf (Page 63)

KH 997

Operation

Preparation

Select the correct mains power plug (o, p, a) for your country

and insert this into the mains power plug unit s. Make sure that the

mains power plug completely locks into place. To release the mains

power plug press on the area marked PRESS and pull the mains

power plug up and away.

Charging the Power Pack with the mains power unit

1. Activate the rechargeable battery test button 2. One to three

of the charging indicator 1 LEDs light up and thus shows the

current rechargeable battery status. If all four LEDs light up then

the Power Pack is fully charged.

2. Connect the retractable USB cable u to the mains power plug unit s.

3. Connect the Mini USB plug connection attachment r to the other

end of the retractable USB cable u.

4. Plug the Mini USB plug connection attachment r into the socket

INPUT DC 5 V 4 of the Power Pack.

5. Connect the mains power plug unit s to a mains power wall

socket. The mains power wall socket should be easily accessible

so that, in the event of a malfunction, the power plug unit can be

quickly pulled from it. The charging indicator 1 LEDs blink one

after the other and thus indicate that the rechargeable battery is

charging. If all of the charging indicator’s 1 LEDs are constantly

alight then the rechargeable battery is fully charged.

6. Disconnect the Power Pack from the mains power plug unit s and

pull the unit out of the mains power wall socket.

NOTE

You can also charge the Power Pack via the USB output of a ►

PC/Notebook. For this connect the retractable USB cable u

to the USB output of the PC and plug the Mini USB plug con-

nection attachment r into the INPUT DC 5 V 4 socket of the

Power Pack. The charging process could take longer due to the

reduced current output.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 73 74

No comments

Silvercrest KH 997 User Manual Page 63