Silvercrest KH 2600 User Manual download pdf (Page 23)

Handling and operation

KH 2600

Alarm Function

When setting the wake time you conﬁ gure the light intensity, the wake sound

and the volume. In the 30 minutes before the set wake time the light intensity

increases slowly to the selected level. When the set wake time is reached the

sound level increases, within 90 seconds, slowly to the selected volume.

Programming alarm wake times

The device has two alarms available. All settings for both alarms can be carried

out independently from each other. You can choose whether, at the programmed

time, an alarm tone or a variety of nature sounds should be played, whether

the radio should sound out or music from an iPod/iPhone or an external audio

device should be played.

Prerequisite: The device is in standby mode.

Press the ALARM1/DOWN button ¡

ALARM2/UP button

on the device or the

AL1/AL2 button on the remote control. The hour

indicator in the display

blinks.

Set with the ►►I button ¡

or the I◄◄ button

the hour. With each button press the time changes

by one hour. Holding down the respective button

for more than two seconds starts the speed setting.

Press the ALARM1/DOWN button ¡

ALARM2/UP button

on the device or the

AL1/AL2 button on the remote control. The

minute indicator in the display

blinks.

Set with the ►►I button ¡

or the I◄◄ button

the minutes. With each button press the time

changes by one minute. Holding down the re-

spective button for more than two seconds starts

the speed setting.

Press the ALARM1/DOWN button ¡

/ALARM2/UP button

on the

device or the AL1/AL2 button on the remote control again to conﬁ rm the

setting.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

No comments

Silvercrest KH 2600 User Manual Page 23