Silvercrest SKF 2300 A16 User Manual download pdf (Page 8)

- 6 -

Note:

The frying process can be overseen through the

viewing window 1 in the appliance lid.

Solid Cooking Fats

To avoid a spraying of the fat and that the appliance

becomes too hot, please take the following precau-

tions when using solid frying fat:

• When replacing old fat with fresh, first melt the

fresh blocks of fat slowly, under low heat, in a

separate pan. Then carefully pour the molten fat

into the deep fryer. When this has been done,

insert the power plug into a socket and switch

the deep fryer on.

• After use, store the deep fryer with the solidified

fat at room temperatures.

If the fat is too cold, it can splatter on remelting! To

avoid this, use a wooden or plastic implement to

make some holes in the re-solidified fat. Ensure that

the heating element is not damaged when doing

this.

• To melt the fat, switch the appliance on with the

on/off switch 0 and set the temperature dial 8

at 130˚C. The lamp integrated into the on/off

switch 0 comes on.

• Wait until all the fat has melted. Thereby, the

green indicator lamp 9 can, on occasion, go out

and light up again. First set the required frying

temperature when all of the fat has melted.

Timer

You can programme in a countdown of up to 60 mi-

nutes with the timer q:

• Press the button " " on the timer to switch it on.

• Press the buttons "+" and "-" to set the desired

time in minutes.

• Press on the button " " to start the countdown

of the time. The programmed time will blink twice

to indicate that the countdown of the time has

begun.

Signal tones sound on completion of the countdown.

The short-period timer q switches itself off automati-

cally.

Note:

On expiry of the countdown the heating element 5

is NOT switched off! Therefore pay heed to the signal

tone from the short-period timer q, so as to avoid

spoiling the food being fried.

Note:

When the battery is discharged, exchange it. Always

use a replacement battery of the same type. Pay

heed to the correct polarity when inserting it.

After Frying

• When the food is ready, pull the handle upwards

until the handle locking button w engages.

• Leave the frying basket 3 in this position to drip

off.

• Press the On/Off switch 0. The deep fryer is

now switched off. Remove the power plug from

the wall socket.

• When the food has dripped off, open the ap-

pliance lid by pressing the lid release button 6.

IB_63853_SKF2300A1_LB6 16.02.2011 9:17 Uhr Seite 6

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Silvercrest SKF 2300 A16 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fryers Silvercrest SKF 2300 A16