Silvercrest SKRI 2000 A1 User Manual download pdf (Page 50)

Setting up and connecting

SKRI 2000 A1

Installation under a wall cupboard

With the supplied mounting plate

you can install the appliance under, for ex-

ample, a wall cupboard. For the installation of the appliance proceed as follows:

Slide the mounting plate

♦

to the rear and remove the mounting plate

Select a suitable installation location for the appliance (see also the section

♦

Set-up location requirements p. 45).

Hold the mounting plate ♦

under the installation location. Thereby the front

edge of the mounting plate

should be approx. 6.8 cm behind the front

of the cupboard so that, after the installation, the appliance is ﬂ ush with the

cupboard. The side edges of the mounting plate

must have a spacing of

about 4.5 cm to adjacent cabinets or walls.

NOTICE

If you wish to install the unit ﬂ ush to the left on an adjacent cabinet or a ►

wall, remove the safety clip

from the appliance beforehand.

Mark the 4 securing points with a pencil.

♦

Using a spike or nail, make a small depression at the respective marking points. ♦

If wished, insert the supplied spacer ♦

with the retaining lug into the

respective depression on the mounting plate

Firmly screw the mounting plate

♦

on with the supplied screws (see illustration).

IB_63920_SKRI2000A1_LB1.indb Abs3:47 17.01.2012 11:15:15 Uhr

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 74 75

No comments

Silvercrest SKRI 2000 A1 User Manual Page 50