Silvercrest SLE 320 A1 Operations Instructions download pdf (Page 43)

SLE 320 A1

Tube drainage

In very damp rooms, it is often more appropriate for the water not to collect in

the water tank, but for it to be drained directly by means of a tube.

WARNING

► When draining via the tube, sustained operation of the appliance is man-

dated. This means that the condensate must be able to drain securely so

that no pooling forms on the ﬂ oor.

♦ Using a screwdriver, prise open the closure

on the reverse of the appli-

ance and remove the plug

♦ Position the tube

, supplied with the appliance, over the outlet aperture

for the drainage tube.

♦ Then insert the plug

into the outlet aperture for the water tank (see Figure 2).

Fig. 2

♦ Set up the appliance such that the end of the tube is positioned over a drain.

Thus, the open end of the tube must be positioned beneath the appliance's

outlet (i.e. the tube must slope downwards).

♦ Switch on the appliance as usual and select a programme.

♦ If you wish to drain the water tank

again, switch oﬀ the appliance, with-

draw the tube

and remove the plug

from the outlet aperture for the

water tank and insert it again into the outlet aperture for the drainage tube.

IB_96805_SLE320A1_LB1.indb 40 24.07.14 11:58

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

No comments

Silvercrest SLE 320 A1 Operations Instructions Page 43