Silvercrest SKD 1000 A3 Specifications download pdf (Page 27)

Cassette Digitizer SilverCrest SKD 1000 A3

English 25

Conformity Notice

This device complies with the basic and other relevant requirements of EMC

Directive 2004/108/EC and the RoHS II Directive 2011/65/EU. The declaration

of conformity can also be found at the end of this user manual.

Troubleshooting

You can solve most common problems yourself using the table below. If the problem persists

after checking the suggested solutions, please contact our Service Hotline (see page 27). Do not

attempt to repair the product yourself.

The cassette digitizer can’t be switched on

 Insert the batteries with the correct polarity.

 Replace the batteries.

 If you are using an optional mains adapter, connect the adapter firmly to the DC input (1) of

the device and to a properly-functioning power socket. Make sure that the small round

connector of the mains adapter has the correct polarity (

) and that the mains adapter

outputs 3 V DC.

No sound

 Are you sure the inserted cassette contains recordings?

 Is the volume set to very low?

Problems when copying cassette content to a computer

 Please check that the USB cable is properly connected.

 Make sure that the USB cable is not damaged.

 Make sure that the correct recording console is configured in the AudioLava software. Select

"Options", then "Device Settings", and in "Recording Console" select the "[MME]

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

No comments

Silvercrest SKD 1000 A3 Specifications Page 27