Silvercrest KH 2218 User Manual download pdf (Page 10)

- 8 -

8. If needed, programme the other memory

positions for alarm times as detailed

above.

When the alarm signal sounds...

... and the alarm function "Radio" is se-

•

lected, the radio switches itself on with

increasing sound volume and the last

adjusted radio station for one hour.

... and the alarm function "Signaltones"

•

has been selected, the signal tone sounds

for 10 minutes.

To close the individual alarm function press

any button except the SNOOZE button f.

The Slumber function

When you press the SNOOZE button f, the

presently active alarm is cancelled for the

time that is programmed for this function (see

Section "Programme time for the slumber func-

tion“, 1 - 59 min., standard value =

9 min.). Meanwhile the SNZ indicator glows

in the display j.

The Reminder function

The appliance will remind you of the dates

that you have programmed in with the re-

minder function. In these cases and on these

days, from 08:00 - 23:00 and on every

full hour, the reminder alarm will sound for

10 minutes. Additionally, the SDA indicator

blinks in the display j.

Press any button to end the reminder alarm..

Adjusting changing display indicators

When the appliance is in Standby, press the

button DOWN g. In the display appears

"

D–" (for Time and Date). Press the button

DOWN g once again, "

–W" appears in the

display (for Time and World Time). Press the

button DOWN g once again, "

DW" appears

in the display (for Time, Date and World

Time in rotation). Press the button DOWN

g once again, "

––" appears in the display

(only Time).

Radio operation

The technical data of the appliance makes

possible an adjustable frequency range wider

than the permitted frequency ranges of 87,5 -

108 MHz resp. 526,5 - 1606,5 kHz. In some

countries, dierent national regulations may

apply to the assigned radio frequency ranges.

Please note that information received outside

of the assigned radio frequency ranges may

not be used, passed on to third parties or

otherwise misused. For VHF radio reception,

completely unwind the wire aeriel l and,

with the radio switched on, determine the

most favourable positioning for it. The appli-

ance has a built-in aerial for MW reception.

To improve MW reception, if required, turn

the radio until it is in the most favourable

position.

Switching the radio on and off

1. Press the button Power h. In the display

j the current frequency and the switch-on

symbol

is indicated.

2. Press the button POWER honce again

to switch the radio function o and return

the appliance to the standby mode.

Manual station selection

1. Use the waveband select button o to

select the required reception waveband,

MW (AM) or VHF (FM).

2. Press the button UP d to search for radio

stations with a frequency higher than the

one indicated in the display.

3. Press the button DOWN g to search for

radio stations with a frequency lower than

the one indicated in the display.

4. If the found radio station transmits RDS-

Data, the indicator in the dis-

play j glows. The display j indicates

the name of the radio station and the time

is updated (insofar as this adjustment is

activated, see the section "Programme the

Update function").

1 2 ... 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments