Silvercrest LCD-TV 32111 User Manual download pdf (Page 23)

English - 21 -

Parental Control

To prohibit viewing of certain programmes, channels

and menus can be locked by using the parental

control system.

This function enables or disables the menu protection

system and allows the PIN code to be changed.

Press M button and select the Settings icon by using

“ ” or “ ” button. Press OK button to view Settings

menu. Use “ ” or “ ” button to highlight Parental

and press OK to continue:

To display parental lock menu options, PIN number

should be entered. Factory default PIN number is

0000. After coding the correct PIN number, parental

settings menu will be displayed:

Parental Settings Menu Operation

Select an item by using “• ” or “ ” button.

Use “• ” or “ ” button to set an item.

Menu Lock: Menu lock setting enables or disables

the menu access. You can disable access to the

installation menu or the whole menu system.

Maturity Lock: When set, this option gets the maturity

information from the broadcast and if this maturity level

is disabled, disables access to the broadcast.

Child Lock: When Child Lock is set, the TV can only

be controlled by the remote control. In this case the

control panel buttons will not work, except for the

Standby Off/On button. When Child Lock is activated

you are able to switch the TV into Standby mode with

the Standby Off/On button. To switch the TV on again,

you need the remote control. Hence, if one of those

buttons is pressed, Child Lock Is On will be displayed

on the screen when the menu screen is not visible.

Set PIN: De nes a new PIN number. Press “OK” and

use numeric buttons to enter a new pin number. You

will need to enter your new pin a second time for

veri cation purposes.

IMPORTANT: The factory default pin number is

0000, if you change the pin number make sure you

write it down and keep it safe.

Timers

While in Timer menu, you can set Sleep Timer or add

Timer to watch the desired channel.

To view Timers menu, press M button and select

Settings icon by using “ ” or “ ” button. Press OK

button to view Settings menu. Use “ ” or “ ” button

to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after

a certain time.

Highlight Sleep Timer by using “• ” or “ ” button.

Use “• ” or “ ” button to set. The timer can be

programmed between Off and 2.00 hours (120

minutes) in steps of 30 minutes.

Setting Programme Timers

You can use this function to set start and end time

manually. The device switches automatically to the

selected channel and outputs it via SCART (For

external recording).

NOTE: For the function “Programme Timer” the

TV device must be switched on.

Press “ ” button to set timers on an event. Programme

timer function buttons will be displayed on the

screen.

Adding a Timer

Press • YELLOW button on the remote control to

add a timer. The following menu appears on the

screen:

Network type: This feature is unavailable to be set.

Timer Type: This feature is unavailable to be set.

Channel: Changes network type by using “ ” or “ ”.

Record Type: This item is unavailable to be set.

Date: Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric

buttons.

56966-LCD-TV-32111-DVB_T-GB-1241110_10071112_50179828.indd 21 24.11.2010 14:59:30

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Comments to this Manuals

No comments

Silvercrest LCD-TV 32111 User Manual Page 23

Comments to this Manuals