Silvercrest KH 700 Service Manual download pdf (Page 18)

- 16 -

6. If the speciﬁed device is equipped with a volume control,

“SUCCESS” will be displayed brieﬂy and the menu will

close. From now on the volume control functions on the

device just speciﬁed.

7. If this device is not equipped with its own volume control

the URC will not allow this selection and shows “VOLUME

ERROR”. Even then the menu will close. The volume con-

trol will then continue to function on the former device.

You can also deactivate the global volume control for speciﬁc

devices.

1. For this purpose select in the VOL/MUTE SETUP with the

 or  button t the function MODE VOL SET and

conﬁrm with the OK button l.

Now press the device button e for the device that is to

be excluded from the global volume control. The LCD

display q shows „SUCCESS“ and the global volume

control is deactivated if the URC is working in the opera-

tional mode of one of the selected devices.

You can also cancel the settings again in VOL/MUTE SETUP.

1. For this purpose select in the VOL/MUTE SETUP with the

 or  button t the function VOL/MUTE RESET and

conﬁrm with the OK button l.

The LCD display q prompts you, with CONFIRM RESET,

to a conﬁrmation which is done by pressing the OK but-

ton l. Press the OK button l If you want to delete the

settings, the SUCCESS indicator then conﬁrms the dele-

tion. Otherwise you press the EXIT button y to abort the

deletion.

Note:

If you press, in this menu, the EXIT button y the entire menu

will close immediately.

Setting the lock function

With the lock function you can block access to all setup

menus.

Hold down the S button r for a little longer than 3 sec-

onds.

2. With the  or  button t select „SYSTEM SETUP“ and

conﬁrm with the OK button l.

With the  or  button t select “LOCK SETUP and

conﬁrm with the OK button l. The LCD display q shows

the current settings.

With the  or  button t now select between „LOCK“

(Block) or „UNLOCK“ (Unblock).

With the OK button l you save the setting. In the LCD

display q „LOCK SETUP“ then appears again.

BDA_KH 2159 - DT-53628_en.indd 16 08.07.2010 18:06:19

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 78 79

Comments to this Manuals

No comments

Silvercrest KH 700 Service Manual Page 18

Comments to this Manuals

Related products and manuals for Remote controls Silvercrest KH 700