Silvercrest KH 245 User Manual download pdf (Page 10)

- 8 -

Taking the device into use

Take the device out of the carton and remove all packaging >

and adhesive foils.

Operation with the built-in Ni-MH batteries

First of all, charge up the built-in batteries. For this, fold out

the dynamo grip on the rear of the device and turn the

dynamo lever f for several minutes at approx. 120 revolu-

tions per minute in any direction.

Battery operation

The device can also be operated with batteries (not supplied).

Open the battery compartment on the rear of the device

by unscrewing and removing the lock-device on the battery

compartment cover h.

Now remove the battery compartment cover

> g and place it

to one side.

Insert 3 x 1.5V batteries of the type "AA/Mignon/LR6" as

per the insertion markings shown in the battery compartment.

Pay heed to the correct poling of the batteries, otherwise

the device will not function and could even be damaged.

Replace the battery compartment cover

> g and screw it

down rmly with the lock-device h.

Connecting the mains adapter

You can operate the device with a power adapter (not supplied)

that concurs with the specications given in the section "Technical

Data".

Using a ngernail, open the rubber cover

> j.

Insert the barrel plug of the power adapter into the socket

for the power supply (DC 4.5V) k on the device.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

No comments

Silvercrest KH 245 User Manual Page 10