Silvercrest SVG 2.0 A1 User Manual download pdf (Page 11)

SilverCrest USB 2.0 Video Grabber SVG 2.0 A1 English

Connecting to your PC

In order to record using the Video Grabber you must first install the software. If

you haven't already done so, go to the chapter entitled 'Installing the software'

and follow the instructions.

 Connect the adapter (5) to the Video Grabber (1) as shown in the earlier

illustration.

 Attach the video output of your source (e.g. camcorder) to the Video

Grabber. Now you have the choice of the following types of connection:

Composite Video Signal

 Connect one end of the Audio/Video cable (4) (yellow, red and white

connectors at both ends) with the video input (yellow) and the audio

input (red and white) of the connection adapter.

 Connect the other end of the Audio/Video cable (4) with a free video

output (normally a yellow socket) and a free audio output (normally a red

and white socket) of your source.

S-Video-Signal

 Connect one end of the S-Video cable (3) (same plug on both cable

ends) with the S-Video input (black) of the connection adapter.

 Connect the other side of the S-Video cable (3) to a free S-Video output

of your source.

Scart Adapter

When your source does not have a Video or S-Video output, you can use

the enclosed Scart Adapter (2).

 Connect either the S-Video cable (3) (same plug on both cable ends) or

the Audio/Video cable (4) (yellow, red and white plug on both cable

ends) to the Scart Adapter.

 Plug the Scart Adapter into a free Scart socket of your source.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

No comments

Silvercrest SVG 2.0 A1 User Manual Page 11