Silvercrest A16 User Manual download pdf (Page 12)

Assembly

SEKU 2000 A1

Then, bring the front panel 

and side panel

together at right angles, so that the locking pins

enter the holes on the right edge of the side panel.

When done, screw all three adapter sleeves



to the right with the screwdriver until the locking pins are

clamped into the adapter sleeves and the panels are seated ﬁ rmly together and at right angles.

Step 3

Take the centre front panel 

and lay it face down.

Then place four adapter sleeves



in the four large holes. Turn the adapter sleeves with the screwdriver

so that the arrows on the adapter sleeves each point to the outer edge of the centre front panel

Insert four double locking pins



in the upper holes on the front sides of the panel and turn the adapter

sleeves

with the screwdriver to the right until the locking pins are ﬁ rmly secured.

Step 4

Now connect the so prepared centre front panel 

with the side panels prepared in steps 1 and 2.

For this, insert two adapter sleeves



in the large holes in the side panels. Turn the adapter sleeves

with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side

panels.

Then, guide each of the double locking pins



of the centre front panel

into the corresponding holes

in the edges of the side panels.

When done, turn all four adapter sleeves



in the centre front panel

with the screwdriver to the right,

until all parts are at right angles to each other and ﬁ rmly tightened.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

No comments

Silvercrest A16 User Manual Page 12