Silvercrest KH 6515 Operations Instructions download pdf (Page 16)

- 16 -

MemoryStick memory cards (MS/MSPro)

MemoryStick memory cards must be inserted into the upper memory card

compartment. Insert MF memory cards into the upper memory card compartment

contacts first and straight.

For this purpose...

- the side of the memory card that the contacts are on must be facing

downwards and

- the slanted corner of the memory card must be on the left side.

USB memory sticks (USB)

The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity

of 512MB.

USB memory sticks must be inserted into the USB port.

• Press the

DVD/CARD/USB button on the remote control and with the control

buttons select the entry USB. subsequently press the

OK button to

display the contents of the memory card.

This procedure also applies to particular memory cards.

• If the USB memory stick is inserted correctly into the port the green

control light next to the lower loading slot will light up.

11.3 Removing memory cards/USB memory sticks

Memory cards/USB Memory sticks should only be removed after the memory

card slot is deactivated. Thus avoiding the possibility of damage or data loss.

• Press the button

DVD/CARD/USB on the remote control to return to the DVD

mode. For this a disc must be inserted into the DVD player. The green

control light next to the memory card slot will go out.

• You can now remove the memory card/USB memory stick from the memory

card slot.

USB

512 MB

Brand

MS CARD

128 MB

12. Playing back DVDs, VCDs or S-VCDs

To play back a DVD/VCD/S-VCD with the DVD player...

• Switch on your television.

• Make sure that the DVD player is ready for operation.

If the television, the DVD player and possibly other connected devices

(i.e. an audio component) are ready for operation and are switched on and

the DVD player is connected correctly to the television you will now see the

"Silvercrest" logo on the TV screen

• Open the disc tray on the front panel of the DVD player by pressing

the button

OPEN/CLOSE on the front panel of the DVD player or on the

remote control.

OPEN will now appear In the display on the front panel of the DVD player

and on the television screen.

• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled

side up.

• Press the button

OPEN/CLOSE on the front panel of the DVD player or on

the remote control again to close the disc tray.

CLOSE will appear in the display on the front panel of the DVD player and

on the television screen while the disc tray is closing.

• The contents of the inserted DVD/VCD/S-VCD will now be loaded; this

may take a few seconds. In the meantime LOAD flashes in the display

on the front panel of the DVD player and Loading... is displayed on the

television screen.

• Playback of the inserted DVD/VCD/S-VCD starts automatically.

Note:

DVDs, VCDs and S-VCDs, that you want to playback with the DVD player

possibly have a country code, which is printed on the DVD cover.

The DVD player can only playback DVDs/VCDs/S-VCDs with the country

code 2.

If no country code is printed on the cover of a DVD/VCD/S-VCD...

• but instead the symbol , then the DVD/VCD/S-VCD can be played

back with the DVD player

• then the DVD/VCD/S-VCD can possibly not be played back with the

DVD player. You can check this by attempting to play back the DVD.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Silvercrest KH 6515 Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for DVD players Silvercrest KH 6515