Silvercrest DTL-1026 Instruction Manual download pdf (Page 13)

Trouble-shooting table

Problem Possible cause Solutions, tips

Compressor and interior

light off.

No current in the wall outlet. Connect another appliance to check.

Mains plug is not tight. Make sure that the mains plug has been inserted

properly.

Compressor is not running,

interior light is on.

The required temperature has been reached. Further cooling is not required. When the inside

temperature goes up, the compressor will switch

on automatically.

New installation. The appliance needs at least 3 hours for the refrig-

erant to settle.

Ambient temperature too low (less than +16 °C) Lower the temperature regulator position.

The appliance is cooling too

much.

The temperature of the inner compartment has

been set to too low a cooling level.

Lower the temperature regulator position.

The appliance does not cool

enough.

The wrong temperature has been selected. Turn the temperature regulator to a higher posi-

tion.

The door is not closed tight or the door seal does

not make proper contact throughout.

See "Checking and cleaning the door seals".

Food is not cooled. Only put food in that has already cooled down.

Too many products have been put in at once. Never freeze more than 2.5 kg at a time.

A layer of ice has formed. Defrost the freezer compartment and check the

door seal.

The ambient temperature is too low or too high Adjust the ambient temperature to climate catego-

ry "N" (+16 to +32 °C).

The appliance is noisy. Several operating noises can be produced de-

pending on the current operation; they do not

mean that a fault has occurred.

Humming – refrigeration unit is running.

Noise of a flowing liquid – refrigerant is flowing

though the pipes.

Clicking – the motor is switching on or off.

Irritating noises. Check for stable position.

Remove any objects from the appliance.

Remove foreign objects from the rear.

If a problem occurs

All electrical appliances can be affected by faults.

As this does not always mean that the appliance is

defective, please use the table to check whether

you can remedy the fault yourself.

Danger!

Never try to repair the appliance when it has

or seems to have broken down. This might

endanger yourself and future users. Repairs

must only be carried out by authorised pro-

fessional staff.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Silvercrest DTL-1026 Instruction Manual Page 13

Comments to this Manuals